PRODUCTS
- Reactor
- Heat Exchanger
- Evaporator
- Fermentation tank
- Filter
- Gas water/liquid ...
- Fuel/oil/liquid S...
- Air receiver tank
- Condenser
- Distillation tank
- Alcohol recovery ...
- polymerization re...
- Rebolie
- cystallizing tank
- Mixing tank
- Air cooler
- Static mixer/pipe...
- Dissolved roller/...
- Dense Medium Sepa...
- Cyclone
Fermentation tank
Fermenter material is a kind of mechanical mixing and fermentation equipment. The device uses the internal circulation mode dispersion with a stirring paddle and break the bubbles, which dissolved oxygen, high speed, good mixing effect. Tank with SUS304 or 316L imported stainless steel, the tank is equipped with automatic spray cleaning head to ensure that the production process meets GMP requirements.Fermenter widely used in dairy, beverage, biotechnology, pharmaceutical, chemical and other industries, the tank has a mezzanine, insulation, heated, cooled and insulation. By filling the tank with the head up and down (or cone) are used in R angle spinning processing tank wall mirror polished, no health corners, while the fully enclosed design ensures that material is always at a state of pollution mixing, fermentation, with equipment breathing air hole, CIP cleaning nozzles, manholes and other devices.
| Volume(m3) | Main Material | Working Pressure(MPa) | Working Temperature(℃) | Motor | |||
| Vessel | Coil(Jacket) | Vessel | Coil(Jacket) | Power(KW) | Speed(r/min) | ||
| 3.5 |
0Cr18Ni9
Q235B
|
0.25 | 0.4 | 20-130 | 151 | 7.5 | 300 |
| 10.8 | 1Cr18Ni9Ti | 0.3 | 0.3 | 130 | 130 | 22 | 150 |
| 75 |
0Cr18Ni9Ti
Q235-B
|
0.3 | 0.4 | 33 | 40 | / | / |
| 130 |
0Cr18Ni9Ti
S30408
|
0.08 | 0.4/0.4 | 30-130 | 30-130/30-130 | / | / |






