The device is to use a certain temperature and pressure to make the material (usually for the solid sodium silicate and water) to produce a dissolution reaction to produce water glass solution. Equipment for steam heating and heat conducting oil heating type two, steam heating temperature of 150 DEG C-160 DEG C, steam pressure 0.5-0.6MPa, heat conducting oil temperature of 180 DEG C - 200 DEG C.
Heat conductive oil due to its low efficiency, high energy consumption, has gradually withdraw from the market. Up to now, the most energy saving is the structure of both sides of the belt shaft, a new type of heat source using steam.
Melt process is to melt the water after the glass material, with a belt machine into the drum, according to a certain material, water than to join the water, in the heating and pressurized dissolved into qualified water glass. At present, roller material is the main.

Volume(m3)		14
Product		Sodium Silicate
Main Material		Q235B 0Cr18Ni9
Working Pressure(MPa)		0.7
Working Temperature(℃)		169
Water test Pressure		1.05
Welded joints coefficient	Barrel	0.85
	Head	1
Moto	Model	Y60L-4
	Power(KW)	15
	Speed(r/min)	3.7